Skip to product information
1 of 4

Product Details

Turbo Marmo Groover Set product details
FlooringLinoleum, Marmoleum and vinyl sheet flooring
Linoleum workflowFirst-pass guide cut, followed by second-pass finish cut
Vinyl workflowFirst-pass groover with the appropriate vinyl blade
IncludedFirst- and second-pass groovers, blades and carrying case
SKU18

Turbo Marmo Groover Set

Turbo Marmo Groover Set

Regular price $2,200.00
Regular price Sale price $2,200.00
Sale Sold out
SKU: 18

The Turbo Marmo Groover Set is a precision two-pass system built for Marmoleum®, natural linoleum, and both homogeneous and heterogeneous vinyl sheet flooring. It delivers clean, accurate seams without the feel-based method required by traditional push groovers, making it the go-to choice for installers who work with both vinyl and linoleum—or those stepping into linoleum installation work for the first time.

Note: The Turbo Marmo Groover Set is our most comprehensive groover, but our Master Turbo Groover is a great alternative for installers working exclusively with vinyl.

A Two-Pass System That Eliminates Guesswork

The Turbo Marmo Groover’s two-pass system eliminates depth errors because each groover serves a specific purpose—one guides the cut, the other finishes it to full weld depth for consistent, high-strength seams every time.

First Pass – Guide Cut (50% depth, centered track): establishes an easily controlled seam line with minimal resistance.
Second Pass – Finish Cut (full weld depth): deepens cleanly to the jute backing (linoleum) or wear layer (vinyl) without tearing or gouging.

Traditional push groovers depend on feel to control depth. Even experienced installers struggle with this—cut too shallow and the weld is weak, cut too deep and you damage the wear layer or jute backing. Staying consistent from start to finish takes constant pressure control and focus that gets harder the longer the run. That inconsistency leads to wasted material, wasted time, and lost money.

The Turbo Marmo Groover fixes that. The first-pass groover creates a centered guide track on straight lines or curves (ideal for templates, circles, and custom inlays). The second-pass groover safely takes the seam to full bonding depth. By separating the guiding cut from the finishing cut, even newer installers can groove accurately to the jute backing on linoleum—without relying on instinct or muscle memory.

Installer Advantages

  • Works tight to the wall and in corners
  • No dust, smoke, or triggered fire alarms
  • No electricity, batteries, or preheating required
  • Stainless-steel construction with quick blade changes
  • Cuts straight seams, curves, circles, and custom inlays
  • Will not clog, chatter, or bottom out on linoleum and vinyl

Blade Selection

  • For linoleum & Marmoleum: use both Marmo blades—the 1st-pass blade sets the track; the 2nd-pass blade finishes cleanly to the jute backing for full weld depth.
  • For vinyl flooring: only the 1st-pass groover is needed, and it can be fitted with any Turbo blade size to match weld rod width.

That versatility makes the Marmo Groover the most complete hand-grooving system available—one toolset covers both vinyl and linoleum with accuracy you can trust. Each set includes two groovers (first- and second-pass), pre-installed blades, and a protective case.

Ahead of the Curve, Even on Curves

Electric groovers may have set the standard decades ago, but they’ve always been slow and offer limited seam control. They take around five minutes to groove 20 feet and only work in straight runs—no curves, circles, or custom inlays. The Turbo Marmo Groover completes that same distance in about two minutes—often faster—because it cuts as quickly as the installer can handle, while tracking precisely on radius work and patterned layouts.

Despite their mechanically set depths, electric groovers still force shallow cuts over concrete subfloors to avoid bottoming out and destroying carbide blades that can cost hundreds of dollars to replace. Those shallow grooves prevent full weld penetration, weakening the seam and leading to failure under traffic.

The Turbo Marmo Groover solves both problems. Its controlled two-pass system reaches full bonding depth on every seam—straight or curved—without ever cutting beyond the jute backing. You get stronger welds, faster production, and complete layout flexibility without being tied to power or bulky machinery.

Patents

This design is covered under one or more of the following patents:
U.S. Patent # 6,640,446
European Patent # 1321251

Installers rely on the Turbo Marmo Groover for reliable depth, clean tracking, and weld-ready seams—job after job. Qualities you won't find anywhere else.

Note: If you're looking for an all-in-one kit that includes this tool, check out the Turbo Marmo Kit.

View full details

Get answers. Solve your next challenge.

Talk to Turbo about tool selection, setup, or a difficult installation. Call or email today.

Buy with confidence — backed by our 30-Day Money-Back Guarantee

Try our tools on real jobs. Return within 30 days of delivery for a full refund. No questions asked. Return shipping is the customer's responsibility. See our return policy.

Turbo's Lifetime Warranty

Lifetime coverage for eligible Turbo-manufactured tools, subject to our warranty terms.

Coverage is for the original purchaser with proof of purchase. Consumables and Leister heat guns are excluded; return shipping is the customer's responsibility.