Master Turbo Kit

The Master Turbo Kit is a complete, professional-grade system built around the Master Turbo Groover for homogeneous and heterogeneous vinyl sheet flooring. It equips pros with everything needed to lay, groove, weld, and skive with speed, accuracy, and comfort — delivering clean, reliable seams across commercial environments.

Note: If you need a solution that handles both vinyl and linoleum/Marmoleum, the Turbo Marmo Groover Set or our all-in-one Turbo Marmo Kit will be your best choice.

Built for Speed, Tailored for Comfort

The heart of this kit is the Master Turbo Groover — engineered to be faster, smoother, and more comfortable than standard push groovers. Its balanced body and ergonomic grip set naturally into your palm, reducing wrist strain and keeping your groove centered and consistent on long seams, curves, and layout work. One customer put it best: “It feels like this tool was molded to my hand.”

Where traditional groovers wander and fight the installer, the Master’s superior grip stability and scrap ejection keep you engaged with the material for clean, consistent weld channels — job after job.

Installer Advantages

• Complete workflow in one kit: groove, weld, trim/skive, and maintain your gear
• Centered around the Master Turbo Groover’s speed, comfort, and precision
• Smooth tracking for long straight seams; works tight to walls and around obstacles
• Roller guide keeps the heat gun at a consistent angle and distance during welding
• Trim Plate + Quarter Moon Knife protect delicate wear layers; Turbo Plane speeds skiving on materials with a sacrificial layer
• Wire brushes remove carbon buildup and keep nozzles performing at peak
• Heavy-duty toolbox keeps everything organized between jobs

Everything You Need for Vinyl Heat Welding

Grooving & Preparation

Master Turbo Groover for single-pass, centered weld channels;
Cove Groover for effortless flash-cove grooves where flooring bends from floor up to wall panels;
Rubber Hand Groover for repair work, ideal when pulling and re-grooving improperly welded seams.

Welding

Leister Triac ST (1600 W) for reliable, consistent heat;
Turbo Detail Nozzle for areas with obstacles and tight geometry;
Turbo Roller Guide to maintain accurate angle/distance over long runs.
Turbo Round Tip (standard 4/5 mm) for even heat and smooth rod flow;
Universal Turbo Nozzle that pre-heats the substrate and welding rod simultaneously to create a maximum-strength bond that won’t budge;

Finishing & Skiving

Coving Trimming Handle — Provides extra grip and control on fine detailing and coves.
Turbo Splicer — Joins welding rod ends seamlessly for a continuous, professional finish.
Trim Plate + Quarter Moon Knife — Provides precise, controlled skiving flush to the surface. Used in two passes for a clean, even finish, and they are the preferred method for safety floors or any surface containing abrasive grit.
Turbo Plane — Trims excess weld rod flush to the floor in a single, fluid motion, combining both skiving passes into one step. It's the faster skiving option for consistent finishing on vinyl and linoleum/Marmoleum. Wait at least 30 minutes or longer after installation ensuring the material has fully cooled and hardened.

Maintenance & Care

Wire Brush and Tuff Wire Brush to remove carbon buildup and keep airflow/heat consistent. All tools store in a heavy-duty toolbox.

The Installer’s Friend — An All-in-One Advantage

Electric groovers were once the industry standard, but they drag through material and slow down production — taking up to five minutes to groove 20 feet and limited to straight runs. The Master Turbo Kit eliminates those bottlenecks entirely. Built around the Master Turbo Groover, this kit redefines efficiency by combining every Turbo tool into a single, unified system engineered for speed, control, and consistency across every phase of installation.

Each component is precision-matched to work together — from the groover’s effortless single-pass cut to the nozzles, roller guide, and finishing tools that follow. The result is a smoother workflow that outpaces electric and manual alternatives alike, letting installers move seamlessly from groove to weld to final skive without interruption.

The Master Turbo Kit isn’t just a collection of tools — it’s the complete Turbo system in one box. Installers gain faster setup, cleaner results, and the confidence of using gear built to work in harmony. For professionals focused on vinyl flooring, this is the ultimate all-in-one solution — built for speed, comfort, and precision from start to finish.

Flooring professionals rely on the Master Turbo Kit to deliver clean, durable seams in hospitals, schools, retail, healthcare, and large-scale commercial projects. If vinyl is your primary material, this is your complete system — from the first groove to the final skive — built for speed, comfort, and total precision.

Want full details about the Master Turbo Groover? Click here.